Why do you need to use wood grain paint with steel structure

               With the rapid development of the mineral industry, the previously precious metals, such as steel and iron, are currently very favorable. Therefore, many buildings are now used in metals such as steel structures, iron pipes, such as steel structure guardrails, iron pipe guardrails, steel structure gazebo, steel structure flower stand, metal corridor and other metal structures:

Due to the characteristics of steel structures, because of its own characteristics, it is easy to be affected by the water in the air or the rain, snow and frost in the natural world, and high and low temperature, and produces rust stains. It not only affects the perception, but also affects the service life of these buildings. However, after the decoration of wood grain paint, the surface of these metals will form a protective film, which effectively isolates the water in the air and the impact of wind and frost in nature on metal.

Secondly, I have to talk about the feel of the steel structure, iron pipe and other materials. The feel of these metal itself has a little rustic feeling, and the hand feels smooth and moisturized after the wood grain paint becomes the film, and the feel is very good. If you are not making wood paint on the metal surface, it is easy to score your hands or other parts when the temperature is too high. After making wood grain paint, not only the heating of the metal, but also the metal feel.

Finally, let's talk about the appearance of the metal. The appearance of the metal, whether it is steel structure or iron pipe and other metals, the surface of the building is monochrome. In addition to inconsistency with the surrounding environment, it also does not seem to have a little natural beauty, and the overall looks full of sharp feelings. However, if the wood grain paint is made, the wood grain paint gives a more gentle and stable feeling of metal building.

Installation standards for steel structure engineering

Steel structures are widely used in the construction industry. Steel structure workshops are the first choice of many entrepreneurs because they can store a large number of products. The SAFS steel structure manufacturer will take you to understand what the engineering installation standards are.

 

1. Marks should be set at the end of the steel to indicate the specification, grade, quantity and material acceptance certificate number of the steel;

 

2. When stacking in the open air, the site should be flat, higher than the surrounding ground, and drainage ditches should be set around;

 

3. When stacking, try to make the back of the section steel face upward or outward to avoid snow and water accumulation. There should be a height difference at both ends to facilitate drainage;

 

4. Before installation, the construction unit should conduct special inspections on the product qualification certificates, design documents and pre-assembly records of the components, and review and record the dimensions of the components;

 

5. Appropriate connection methods should be adopted to make the joint design consistent with the simplified structural calculation model;

 

6. When hoisting the steel structure, appropriate measures should be taken to prevent excessive bending and torsional deformation, and heat blocks should be placed at the contact between the rope buckle and the component to prevent damage to the component;

 

7. After the steel structure is hoisted in place, the brackets and other connecting parts should be fastened in time to ensure the stability of the structure;

 

8. When using tools at high places, spare parts should be put into the tool bag, and they should not be thrown up and down;

 

9. When working in rainy days, reliable anti-skid measures should be taken, and lightning protection should be paid attention to during thunderstorm seasons;

 

10. Before construction, the weather conditions are good, and no work is allowed if the wind is above level 4.

What is the difference between multi-layer steel structure and single-layer steel structure

The characteristics of steel structure are: the heat resistance of steel structure is good, but the fire resistance is poor; the test shows that when the performance of steel changes from normal temperature to 150 ℃, the strength and plasticity of steel change greatly at 600 ℃, and the strength drops to zero , Completely lose the bearing capacity, and the fire resistance level of the steel structure is improved. When the fireproof coating thickness of the fireproof coating is 15mm, the fire resistance limit of the steel member can reach 1.5h.

 

1. Single-story: There is only one-story building on the ground, which is a single-story building, including industrial plants (single-story height above 6-8m), civil buildings (2-3m) and agricultural factory buildings (above 2.2m) and other buildings.

 

2. Multi-storey: Refers to 4-6 storey buildings.

 

3. High-rise: Refers to buildings with more than 10 floors and a total height of less than 100 meters.

 

4. Super high-rise: Refers to buildings with more than 40 floors and more than 100 meters.

 

5. High-rise buildings and super high-rise buildings mainly adopt steel-concrete structures, such as: cross columns, box columns and other structural forms.

 

The above is the introduction of SAFS steel structure to different places of multi-layer and single-layer. Steel structure is widely used today and is also loved by more builders.




Two major methods of beam-column connections in steel structure buildings

Steel structure engineering is one of the main types of building structures, commonly used in modern construction projects. Steel's cha...